bobbin

He plans to import an automatic bobbin loader..

他计划进囗一架自动装线机。

The pad on which bobbin lace is made.

花边垫子在其上编织花边的垫子

A spindle or bobbin around which yarn is wound in weaving.

纡管; 纬管在纺织中绕以纱线的锭子或筒管

Decrease the bobbin thread tension.

请调弱底线张力。

Increase the bobbin thread tension.

请调强底线张力。

Properly thread the bobbin case.

重新正确地穿梭壳的线。

Replace the bobbin or the bobbin case.

请更换梭芯或更换梭壳。

The bobbin does not rotate smoothly.

梭芯的滑动性不良。

Andrew Carnegie started out as a bobbin boy in a cotton factory.

卡耐基开始工作时是在一家棉纺厂当线轴工。

Bobbin hangers of six rows in single tier?

吊锭?单层六列?

Bobbin thread easy to be threaded and adjusted.

底线易穿易调整。

Damaged skewers and clogged bobbin holder.

木锭子破损,纱管支架底座阻塞。

Excessive sloughing off of ring bobbin.

细纱管脱圈太多。

He plans to import an automatic bobbin loader.

他计画进囗一架自动装线机。

The bobbin does not rotatesmoothly.

梭芯的滑动性不良。

The bobbin thread tension is too high.

底线张力过强。

We need plastic motor insulation bobbin, class F.

我们需要采购塑料马达绝缘绕轴,等级为F.欢迎联系我们!

Vibrator for bobbin to feed automatically.

骨架用震动盘自动送料.

Tension is the key during the bobbin rewinding.

在盘纸复卷过程中,张力大小对盘纸的影响至关重要。

Then goes on a layer of bobbin net.

接下来的一层是线圈。

Single pin holder at speed frame bobbin holder base.

粗纱机纱管底座振动。

Andrew was determined to become something better than a bobbin boy.

安德鲁决心要找一个比绕线工好一点的工作。

The Cone bobbin with holes is recommended for heating.

蒸纱推荐网眼络纱管。

For threading needle(s), looper, spreader etc. and replacing bobbin.

机针、弯针、分离器等穿线和更换旋梭时。

Improper arms of bobbin holder.

筒管支架不合适。

Eg: Please take off the bobbin.

请把那个绕线筒拿下来.

Bobbin lace is a more widespread craft that originated in Flanders.

线轴编织花边,起源于法兰德斯,是被广泛采用的一种手工艺。

Creel draft variation and skewers/ bobbin holders clogged with waste.

粗纱架有意外牵伸或吊锭由于飞花堵塞不灵活。

Used for testing breaking tenacity and elongation at break of raw silk in skein and bobbin.

用于测定绞装和筒装生丝的断裂强度及断裂伸长率。

Reliable Mechanism to Trim Needle Thread and Bobbin Thread in the Meantime.

装有同时切断面线和底线的可靠切线机构。

Set bobbin presser 1 down to make the winder come in contact with the belt.

放倒梭芯压片1,让绕线轮接触皮带。

FEATURES:Applied the large shuttle hook and bobbin of full-rotation.

采用全回转式的大釜大梭仔、适合粗线之车缝。

Bobbin used by wire joint should be crimping tools of 3 point crimping type.

压线帽使用的压线轴必须是专用配套的“三点抱压式”压接钳。

Using a bobbin can prevent different wires from intertwining with each other.

用线板缠线可以有效防止不同的线缠在一起。

Using a bobbin can prevent different wires from windling with each other.

用线板缠线可以有效防止不同的线缠在一起。

Metal removeal of bobbin winder's fluted roller is a weak point in our country.

本文提出了用铣削法加工锥形槽筒变螺距,变深度螺旋槽的工艺;

A buffering mechanism is arranged between the base and the bobbin creel.

底座与筒子支撑架之间设有缓冲机构;

The problem of rewinding of yarn from pot to stationery bobbin is also studied.

本文最后并研究退绕时的纱线张力及沮绕速度问题。

We require one 12 Bobbin Rigid Type Core Stranding Machine with Batch Loader.

我们需要一个配有单装载机的12绕线筒,刚型中心股机器.

The moment the bobbin has been wound up, the bobbin presser is released, and the bobbin winder will stop automatically.

绕线结束之后,梭芯压片分离,绕线轮自动地停止。

A slight amount of twist is imparted to give strength. The strand, called roving, is laid onto a bobbin.

条子上加上了弱捻以便使其具有一定的强度,形成的纱条称为粗纱,被卷绕到筒管上。

The thread has not been passed through the notch of the bobbin case tension spring.

底线不能进入到梭壳的线张力弹簧下面。

The first bobbin lace probably originated in Flanders in the early 16th century.

线轴编织花边可能始于16世纪初的法兰德斯。

Removing the bobbin case. Raise the bobbin case latch to remove the bobbin case.

扳起梭壳的卡头,进行安装和拆卸。

Removing the bobbin case。 Raise the bobbin case latch to remove the bobbin case.

扳起梭壳的卡头,进行安装和拆卸。

The bobbin should turn in the direction of arrow B when the thread is pulled in the direction of arrow A.

如果把线朝箭头A的方向拉之后,梭芯向箭头B 方向转动的话,则插入方法正确。

The circular opening in a needle that carries the top thread through the fabric and into the bobbin assembly.

针里面的圆形开口,带着顶端针穿过织物,进入线轴组合里。

Pass the thread through threading slit 1 in the bobbin case, and route it under tension spring 2.

把线穿过梭壳的穿线1,然后从线张力弹簧2的下面穿过。

Remove machine basting by snipping the top thread at frequent intervals and pulling out the bobbin thread first.

拆除机制粗缝的方法:先抽出底线,后剪断间隔处的面线即可。

A slight amount of twist is imparted to give strength. The strand, called...ving, is laid onto a bobbin.

条子上加上了弱捻以便使其具有一定的强度,形成的纱条称为粗纱,被卷绕到筒管上。