deburr
Can deburr and finish edges simultaneously.
能同时清理毛刺和完成抛光。
Deburr per reell spec 248rev a to remove all heat-treated scale from I.D.
参照转速248的标准,进行去毛刺处理,去掉所有热处理后的多余尺寸。
"Are there air knives, fluid heads & ultrasonics on the deburr machine?
去毛刺机器是否有风刀，流动性&超声波？"
"Are the surface of the boards and holes completely dry after deburr process?
去毛刺后，板面与孔是否完全干燥？"
Other employees inspect and deburr the parts while the operator prepares the machine for a new job.
其它雇员检查和清理毛刺零件当操作员机器为一个新工作做准备。
"Is there a pre-startup checklist for the Deburr line? Is it current(completely filled in)?
去毛刺线是否有启动前点检表？是否已经运行（完整填写）？"
Experimentation shows that the abrasive water jet test worktable can polish,deburr,wash,shell and incise through changing technics parameter.
试验表明,通过调整工艺参数,本磨料水射流试验工作台可对材料进行表面抛光、去毛刺、清洗、剥层、切割等加工和实验。
For general finishing,good metal removal and exceptional wear.Performs in a wide variety of deburr,deflash and radius applications.
用于普通的光整，很好的切削性能，很少的磨耗。广泛用于去毛刺，去飞边和倒角。
"Is a hole inspection/checker used after deburr for plugged holes? If so, are the data used for continuous improvement activities.
在去冲孔孔内毛刺后，是否检验孔？若有，是否有持续改善的资料？"
Its principle is using an abrasive-laden viscoelastic media to finish, deburr, and polish curve surface or internal cavity.
磨料流加工的原理，是采用带有高硬度磨料的半固态聚合物，在压力作用下发生相对于零部件表面的流动，对表面产生加工。
The paper introduces deburr algorithm before line trace in the course of vector quantization of binary map image, and it can receive better effect through applying for the algorithm.
摘要介绍对二值地图图像矢量化过程中的线跟踪操作之前的去毛刺算法，应用此算法可以得到更好的线跟踪效果。
Abrasive flow machining (AFM) is a nontraditional finishing process that is used to deburr, polish, radius and remove recast layer by flowing a semisolid abrasive media across the workpiece surface.
摘要磨料流加工是表面加工中发展起来的一项新工艺，是通过将半固态的流体磨料挤压通过工件待加工表面来达到去毛刺、抛光、倒角和去除再铸层的目的。
Deburr Algorithm of Binary Image Based on Outline Trace
基于轮廓跟踪的二值图像去毛刺算法
5"Are the surface of the boards and holes completely dry after deburr process?
去毛刺后，板面与孔是否完全干燥？"
2"Are there air knives, fluid heads & ultrasonics on the deburr machine?
去毛刺机器是否有风刀，流动性&超声波？"
1"Is there a pre-startup checklist for the Deburr line? Is it current(completely filled in)?
去毛刺线是否有启动前点检表？是否已经运行（完整填写）？"
1.Experimentation shows that the abrasive water jet test worktable can polish,deburr,wash,shell and incise through changing technics parameter.
试验表明,通过调整工艺参数,本磨料水射流试验工作台可对材料进行表面抛光、去毛刺、清洗、剥层、切割等加工和实验。
4"Is a hole inspection/checker used after deburr for plugged holes? If so, are the data used for continuous improvement activities.
在去冲孔孔内毛刺后，是否检验孔？若有，是否有持续改善的资料？"
deburr
vt. 去毛刺, 清理毛口, 倒角
deburr(ing)
打毛刺
7.Abrasive flow machining (AFM) is a nontraditional finishing process that is used to deburr, polish, radius and remove recast layer by flowing a semisolid abrasive media across the workpiece surface.
摘要磨料流加工是表面加工中发展起来的一项新工艺，是通过将半固态的流体磨料挤压通过工件待加工表面来达到去毛刺、抛光、倒角和去除再铸层的目的。
8.Abrasive flow machining (AFM) is a nontraditional finishing process that is used to deburr, polish, radius and remove recast layer by flowing a semisolid abrasive media across the workpiece surface.
端面流体膜密封的浮环半频摆动自振特性是其一种固有属性,类似于径向流体膜轴承中的“半速涡动”。