dowels
Place the engine cylinder head over the dowels.
将引擎汽缸头放在销上。
Slide the one-piece gasket over the dowels and onto the block.
将单片垫圈沿定位销滑动到汽缸体上
The carpenter gauged the dowel with calipers.
那木匠用卡钳估量暗榫。
Dowels locate the cap and base for correct assembly.
定位销则将座罩和基础准确定位,保证组装正确。
All dowels must have accessible knockout holes without dismantling.
在没有分解的情况下所有的合销应有易卸的敲击孔。
Verify that housing alignment dowels are in position before installing housing.
安装壳体前先验证壳体校准销均已定位。
The titanium dowels were put into the teeth canal fixed through alveolar teeth.
采用预制钛桩即刻行根管内加齿槽骨贯穿固定将断牙固定于原位。
Recommendations for the position and size of the holes for these dowels can be found in the table.
这些暗销孔的建议位置和大小可以在表8中找到。
The two dowel pins align the cap and base of the housing.
用两个定位销将座罩和轴承座基础对准。
Dimples are cast into the housing feet to identify the drilling location for the dowels.
轴承座上铸有凹印,表示为定位销钻孔的位置。
Dowels must be press fit in die shoes and strippers, and push fit in die sections.
在摸座及脱料板上的合销必须为压配合,在摸板上的为推配合。
Fastening of material, tie rods, resins, powder-operated gun-nailers; nails, dowels, chemical...
分类标题：固定拉杆|紧固材料和五金类...
Use blind dowels only when impossible to drill through, if blind dowels are required, use removal pull type dowels.
仅仅当不能钻穿时才使用盲销，如要求使用盲销，使用带牙合销。
Fit a dowel pin here to keep the adjacent parts aligned.
在这里装一个定位销，使相邻的两个部件对准。
He said he figured the rainwater had settled in the pinboles, where wooden dowels held the joints together.
他说，估计是雨水渗进了木钉孔里，而正式这些木椎钉使他们结合在一起的。
Remove stem assembly (A) and lock setting by drilling hole and inserting dowel pin (C).
拆卸阀杆总成(A)，并且通过钻孔锁定设置和插入定位销(C)。
The armourer harvests wood to make either slat armour composed of numerous wooden slats sewn together or rod-armour made of wooden dowels.
工匠们砍伐木材，或用诸多木板拼成板甲，或用诸多木条钉成栅甲。
However, increasing the diameter of the dowel may reduce the stress slightly.
垂直受力时：螺旋根柱侧方的应力随受力而往两侧增加。
Dowels must not be used to withstand side thrust force (keys are to withstand this force and will be specified when quoting).
当承受侧力时不能使用合销(健用来承受这种压力,在报价时应说明)。
It designs two spring dowel locating systems to rotate and locate the part.
采用了两组弹簧斜销限位机构分别带动和限制了工件的转动。
The nonlinear static behaviors of rectangular moderate thickness plate with dowels on elastic foundation are investigated.
研究弹性地基上带传力杆的间断中厚矩形板的非线性静力特性。
Tooling Plate: Easy access mounting, accurate dowel location, accepts shocks.
模具板：轻松访问安装，定位准确的木钉，接受冲击。
And the nonlinear static and dynamic behaviors of the discontinuities moderate thickness rectangular plate with dowels on elastic .
研究了弹性地基上带传力杆的间断中厚矩形板结构的非线性振动特性。
Test methods.Determination of the yield moment of dowel type fasteners.
木材构件.试验方法.暗销形紧固件屈服力矩.钉子(Timber structures.
Do water lines interfere with any components, Guide pins, EJ pin, Screws, Dowels, Inserts, mechanisms and E’bolts holes?
运水是否与其他部件干涉？
Originally the Khad metal dowels which were fine,until Rover decided to switch to plastic ones on acost saving exercise.
由于温度计的位置，它对这种大量的热量的侦测会非常慢，然后引擎迅速过热，最后导致大多数垫圈损坏，更不用说K系列的了。
The individual parts are assembled in doubly overlapping 'sediments' which are self-positioned through a set of 2.550 (CNC) pre-drilled dowels.
个别零件组装双重叠'沉积物，这是自我定位通过一套2.550 （数控）预先钻销。
A rational method of disposal for a the dowel bar is proposed through test-in-place and finite element analysis.
提出了传力杆的合理布置方式，并通过现场试验和数值模拟进行了分析和验证。
I also used a lightweight carbon fiber rod in place of the heavy wood dowel boom.
原木制的机身杆重了,换成鱼杆。
The properties of converse-spine nut joint, dowel joint and tenon joint were separately and studied through experiment.
通过试验，对金属倒刺螺母螺杆连接件接合与直角榫接合及木螺钉接合性能进行了比较和研究。
We are manufacture of minature precision ground and polished wire productslike Pins, Shafts, Rollers, Dowel Pins, etc..
我们是对金属棒制品进行精磨和抛光，例如：销、轴、辊子，定位销等产品的生产制造。
Ball Plunger, Soft-tip socket set screw, socket screw, disc spring, dowel pins, springs pins, washers.
弹性柱塞,不锈钢螺丝,公,英,美制紧固件
The device can automatically mount single part and dowel into a work-piece that contains four parts.
该装置可将单个块零件和销零件自动装配成含有四个零件的工件。
Objective: To make the dowel nucleus fusion model with self-cured acrylic resin ingot.
目的:应用自凝胶条及自凝塑胶材料制作桩核熔模。
The results prove these properties of converse-spine nut to be better than those of dowel joint and tenon joint.
结果证明，金属倒刺螺母螺杆连接件接口的接合性能优于直角榫接合和木螺钉接合的性能。
Objective To compare the long term effectiveness of three types of dowel pin as treatment post core crowning.
目的比较3种类型桩钉作桩核冠修复体的远期疗效。
When endodontic dowels were in stalled in standardized moels, direct comparisons of stress distributing properties were analysed through photoelastic stress analysis.
本研究是藉由光弹应力分析法来分析临床上经常使用的一种现成螺旋根柱，比较观察其长度及直径大小对于所产生的应力之影响。
They were restored with split dowel and metal crown after rootcanal treament, and followed up fof 2 to 4 years.
结果:所有分体桩与基牙密合度均良好,固位好,冠边缘密合,其中有3颗因牙合创伤,5颗因根尖周炎而失败。
The combination of the frame parts should basically be made by wood dowel attachment or by tenons and glue.
框架部分的连接处应该以木钉或者木榫胶水等方式。
There are three rings, shaped spacers that keep the rings above the base with the clock face, and a hardwood dowel rod.
这有三个环，作为基础使得圆环在表盘正上方的支柱，和一根硬木杆。
Cast indications mark the positions where holes can be drilled for dowel pins, sensors for condition monitoring and additional grease nipples (fig).
可以钻孔的位置均有铸造标识,用来装暗销、状态监测器和附加的油嘴(图7)。
Under load conditions, the stress-producing characteristics of the dowel increased with shorter lengths and smaller diameters.
而根柱较短其应力集中也是较明显，直径较大者则稍形缓和。
Abstract： The dowel action of reinforcing steel bars crossing cracks is modeled for the finite element analysis of reinforced concrete.
摘 要： 本文提出了一个用于有限元分析的钢筋销栓作用模型。
Combined with the construction practice,the paper introduced the design idea of concrete bar dowel for pretensioned grooved stretching bed etc.
根据施工实践,简要地介绍了先张法槽式张拉台座中的砼传力柱的设计思路。
Objective To compare clinical application of internal fixation with titanium dowel and general dowel crown for repairing fractured teeth.
目的比较骨支持式钛桩内固定与核桩冠修复牙折的临床效果。
The restoration of metal crown and dowel crown was been imitated on the model of the Clearfil SE Bond adhensive fracture tooth.
结果金属全冠修复后的折裂牙最大应力值出现在金属全冠上，加了桩核修复后，牙体的应力值有所增加。
Using a nail or awl, punch a hole in the middle of each turbine endpiece as marked (this is where your wooden dowel will slidethrough).
用指甲或锥子，冲压一个洞中间的每一块年底汽轮机作为标记（这是您的木制销子将通过幻灯片） 。
As ahead tooth,it has an ideal effect for dowel crown of casting and metal board,so as for beautiful and reducing lose of bone.
对于前牙,为了美观和减缓牙槽骨的吸收,采用铸造桩冠加金属翼板的修复方法,可以取得较理想的效果。
The nonlinear vibration behaviors of a rectangular moderate thickness plate with dowel on elastic foundation were investigated.
研究了弹性地基上带传力杆的间断中厚矩形板结构的非线性振动特性。
It is concluded that the dowel action of reinforcing main bars has a significant contribution to the strength and ductility of shear critical members.
同时发现，纵向主筋的销栓作用对深梁的承载力和变形能力都有重要的影响。