flexural
The beam has a constant flexural rigidity.
该梁具有常数弯曲刚度。
Testing mechanism of flexural rigidity is described.
描述了抗弯刚度的测定机理。
The force used to break the bar is the flexural strength.
塑封料塑封后的小棒，用3点弯曲测试抗弯曲的强度。
For flexural strength test of cement specimen and other nonmetallic material.
用作水泥或其它非金属脆性材料试块的抗折强度测定。
The flexural strength of all FRC posts was tested with a 3-point bending test.
三点挠曲实验比较不同弯曲度的FRC弯钉与FRC直钉的挠曲强度和挠曲模量。
The flexural strength was determined by using the 4-point bending technique.
本研究以四点弯曲的方式量测挠曲强度。
A nonlinear finite element analysis of 4 RC deep flexural simply supported beams with the program VT2 is presented.
摘要使用基于扰动应力场模型的非线性有限元程序VT2分析了4个深受弯简支梁的受力性能。
Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics (08.
塑料的张力、压力和柔性蠕变以及蠕变断裂的试验方法(08。
Flexural strength and elasticity decreased significantly with increasing wood content.
含木率之增加降低了抗弯强度及抗弯弹性率至为显著。
The flexural modulus and drape of fabrics have great influences on the shape and style of garment waviness.
弯曲性、悬垂性不同的面料能塑造出不同的服装波浪造型，弯曲性、悬垂性优良的面料塑造的波浪造型优美。
The flexural impact behavior of concrete beams which reinforced with HPP, steel fiber and these two fibers is studied.
研究了掺加异型塑钢纤维、钢纤维以及这两种纤维混杂的混凝土梁的抗弯冲击性能。
Flexural strength, flexural modulus and impact strength of CF/BPR composites increase with increasing CF content.
随着破纤维含量的增加，CF/BPR复合材料弯曲强度、弯曲模量和冲击强度均逐渐增加；
The material mechanical properties, such as flexural strength, are measured by three point bending techniques.
利用三点弯曲方法测定了材料的抗弯强度等力学性能。
In finite and tiny displacement machine,flexural hinges are a new structure machine to implement tiny displacement.
在有限微量位移机构中,柔性铰链是实现微位移功能的新型机械结构。
The modified straw powder treated with Titanate coupling agent could increase the flexural strength of PVC sheet.
经钛酸酯偶联剂处理的改性秸秆粉能增强PVC板材的弯曲强度。
A flexural oscillation model about V-shaped silicon electro-thermal microactuator is presented.
提出了V型电热硅微致动器的弯曲振动力学模型。
Small size of the grains of sand can give the materials good reinforcement with the raise of the flexural properties.
粒径小的砂料具有更好的增强效果，也能使材料的弯曲性能提高；
In the present paper the density of bodies beforeand after sintering as well as flexural strength were measured.
相应地对成型体的密度，弯曲强度及烧结体的密度和强度进行测量。
This is further aggravated by cracking, which reduces the flexural stiffness of members.
开裂降低了构件的弯曲刚度，这会进一步使挠度增大。
A kind of improved flexural vibrating plate is put forward based on the analyzing of vibration characteristics.
摘要从薄圆板振动特性出发，提出了一种改进的弯曲振动板。
The theory,method and effect factors of flexural experiment were introduced in this paper.
本文介绍了弯曲性能试验的原理,方法及影响因素。
The effects of secondary torsion on shear strength of biaxial flexural reinforced concrete beams are analyzed.
探讨了次生扭矩对钢筋混凝土双向受弯梁抗剪承载力的影响。
With the rise of high silica glass fibers' content, the flexural strength and modulus of the composite increase.
随着高硅氧纤维含量的提高, 材料的弯曲强度及弯曲模量均明显提高.
The flexural strength and impactstrength of non-continuous long fibres reinforced phenolics toughen...
非连续长纤维增强塑料的弯曲强度、冲击强度优于短纤维增强塑料。
Shear wave logging tools use dipole radiation in the borehole to generate flexural waves in formation.
针对高频散的挠曲波,将基于模拟退火的优化方法引入阵列偶极子测井资料处理中,以得到横波时差。
This paper studied the fatigue properties of the plain concrete under constant amplitude flexural cyclic loading.
在室内混凝土试件弯曲疲劳试验的基础上，研究了素混凝土受弯试件在等幅重复荷载作用下的弯曲疲劳性能。
Both flexural strength and impact strength of FBZ/E laminate are more than 3 times FBZ laminate.
FBZ/E层压板的弯曲强度和冲击强度都比FBZ层压板提高3倍多;
The results show that the composites filled with modified fluorophlogopite have excellent flexural prop...
标准氟金云母虽然可提高弹性模量,但却使弯曲强度下降.
The more the thickness/the weight/the flexural rigidity and the drapability increase, the overlap decreases.
其中关系最为密切的是面料的厚度，总的趋势为随着面料厚度、抗弯刚度、悬垂系数、平方米克重的增加，重选量减少。
According to Mechanics theory the formulary of flexural rigidity,axial rigidity,shearing rigidity are deduced.
根据连续力学原理推导了结构抗弯刚度、轴向刚度、抗剪刚度公式。
The stiffness of a fabric can be objectively determined as the average of the flexural rigidities (in warp and weft direction) .
织物的刚性可以客观地从经纬两个方向的弯曲刚度来确定。
The stiffness of a fabric can be objectively determined as the average of the flexural rigidities(in warp and weft direction).
织物的刚性可以客观地从经纬两个方向的弯曲刚度平均值来确定。
For the brittle ceramic materials, flexural strengths are determined by the stress at fracture in transverse bending tests.
对脆性陶瓷材料来说，抗弯强度即为横向弯曲试验中样品断裂时的应力。
The relationship between compressive strength (flexural strength) with ice temperature, stress and direction is analysed in the paper.
分析了海冰的压缩强度和弯曲强度与冰温、应力率和加载方向的关系。
The structural strength and flexural rigidity of the fuselage main frame are computed and verified by CAE system software and the results are analyzed.
应用CAE系统软件计算承力密封框的刚度和强度,并分析了计算结果。
The bending experimental results show that the highest flexural strength of the joint at room temperature was acquired to be 13.6MPa.
弯曲实验结果表明,采用该工艺得到的接头最大弯曲强度为13.6MPa。
The experiments included compressive strength, flexural strength, shear strength of sand grouts, stability and fluidity of net grouts.
试验内容包括砂浆的单压、抗弯、抗剪强度试验以及净浆稳定性和流动度试验。
Then the total flexural curvature and the natural tortuosity of the centerline can be expressed with the change rates of deviation and azimuth angles.
另一方面,考察了井孔内具有抗弯刚度套管微元的平衡状态,建立了套管微元所应满足的控制微分方程及其差分格式。
The parameters reflecting normal stiffness have more obvious effects on extensional vibration mode than those on flexural mode and torsion mode.
结合面法向刚度大小的参数对纵向振动模态的影响比对弯曲、扭振模态的影响显著;
Based on ASTM and JSCE method,a new flexural toughness evaluating method suitable for macro-fiber reinforced concrete is first proposed.
基于美国A STM及日本JSCE方法,提出了适合评价粗纤维混凝土弯曲韧性的新方法。
Strong end restraint provided by heavy elements, such as footings, can improve the flexural strength of critical column sections.
摘要基础等构件提供的端部强约束能提高柱临界截面的抗弯承载力。
The flexural strength of EB treated specimen increased while the flexural module and the short beam shear strength changed unobvious.
辐照后复合材料的弯曲强度得到明显提高，但弯曲模量和层间剪切强度基本不变。
Advanced technical ceramics. Monolithic ceramics. Mechanical properties at room temperature. Part 1 : determination of flexural strength.
高技术陶瓷.单片陶瓷.室温下的机械特性.第1部分:抗弯强度的测定
Experimental research on flexural behavior of the different grade RC beams strengthened with ferrocement mortar through six RC beams is carried out.
通过对6根RC足尺梁受弯试验,研究不同强度等级RC足尺梁采用高性能复合砂浆钢筋网加固后的受弯性能。
Glass fiber is used to reinforce material for increasing toughness, flexural strength, and tensibility in unsaturated polymer modified concrete.
玻璃纤维则是作为强化材,以增加水泥浆体的韧性及抗弯、抗拉等机械性质。
The compoundtransducer is composed of the sandwich vibrator in longitudinal vibration and the circular thin plate in flexural vibration.
该复合换能器由夹心式纵向振动半波长换能器及弯曲振动的薄圆盘组成。
The molding technology of three-way plastic tube with flexural core is analyzed and the molding faults in plastic injecting process are forecasted.
分析了带弯芯塑料三通管的注射成型工艺,并对成型过程出现的缺陷进行预测。
Based on a large quantities of latest relative documents, flexural capacity of FRP strengthened masonry walls are summarized, and some issues ...
在综合有关资料的基础上,综述了国外对FRP加固砌体平面外弯曲性能研究的成果,指出今后有待研究的有关问题。
The results show that high temperature has a great influence on the bending capacity and deformation of the unbonded prestressed RC flexural members.
试验表明，高温对无黏结预应力混凝土受弯构件的抗弯承载力和变形，都有较大的影响；
The compressive strength of the G/C is similar to, and the flexural strength is lower than, those of carbon felt/pyrocarbon composites.
复合材料的力学性能比纯石墨高一倍,抗压强度与炭毡增强C/C复合材料相当,弯曲强度比炭毡增强C/C复合材料略低。