flywheel

Position clutch cover over disc and on flywheel.

把离合器盖板放在离合器片和飞轮上。

Check/correct flywheel alignment.

检查/修正飞轮校正。

A Novel UPS Based on Flywheel Energ.

基于飞轮储能技术的UPS系统。

The protection of flywheel trip to be confirmed.

飞车保护提交。

The flywheel is made from carbon steel.

飞轮由碳钢制成。

Use hammer and brass drift to tap ring gear onto the flywheel.

用锤子和黄铜冲销轻轻敲打环齿轮进入飞轮。

Facing on flywheel side of disc torn, gouged, or worn.

离合器片在飞轮侧的表面撕裂、擦伤或磨损。

A small flywheel that regulates the speed of a spinning wheel.

锭盘调整手纺车速度的小飞轮

Position flywheel and O-ring on crankshaft and align bolt holes.

安装飞轮和O形环在曲轴上并对齐螺栓孔。

Remove the flywheel or converter drive platDiscard the old bolts.

拆卸飞轮和转换器驱动圆盘。扔掉旧的螺栓。

The clutch disc fits between the flywheel and the pressure plate .

离合器片安装在飞轮和压盘之间。

You can see the flywheel mechanism and the little sounding wire.

你可以在图片中看到飞轮装置和小测深绳。

It is no problem to keep a ceramic flywheel appropriately magnetised.

磁化陶瓷引擎的飞轮不存在任何问题。

The sensing itself is done by magnetising a spot on the rim of the flywheel.

感应过程通过磁感应调速轮边缘的一个点来实现。

Habit is the enormous flywheel of society,its most precious conservative agent.

习惯是社会的巨大飞轮,也是社会极保守的代理人。

Lightly scuff sand flywheel face with 180 grit emery clotThen clean surface with a wax and grease remover.

以180号金刚砂布轻轻打磨飞轮表面。然后以除去蜡与黄油的去污剂清洗表面。

Remove the upper flywheel and converter housing bolts and loosen the bottom bolts.

拆卸上部飞轮及转换器外壳螺栓,拧松底部螺栓。

Lightly scuff sand flywheel face with 180 grit emery clotThen clean surface with brake or carburetor cleaner.

用180金刚砂纸轻轻地磨擦飞轮表面。然后用煞车或化油器清洗器加以清洗。

The heavy flywheel coupled with the spindle ensures smooth running of the spindle.

主轴装有飞轮,能保证主轴运转平稳。

Improvement is made to the positioning feller gauge in flywheel keyway broaching machine by V-type auto center align.

利用V型块自动对中定位原理,对飞轮键槽拉床定位塞尺进行改进。

The energy of the flywheel is stored in this rapid rotation, which generates electricity on demand.

飞轮的能量就储存在快速的旋转中,需要的时候就可以产生电力。

Tobias flywheel system, based on variable structure control theory, an uncoupledvariable structure control law is?

针对零动量飞轮,基于变结构控制设计了解耦变结构控制律,并分析了其稳定性和鲁棒性。

If the flywheel is loose, a distinct knock will occur when the key is turned on.

如果飞轮松动,当钥匙被打开的时侯,会发出一种明显的撞击声。

DC torque motor under the reaction flywheel control mode was used in nacelle azimuth control in this paper.

摘要实现了用直流力矩电机在反作用飞轮控制方式下对气球吊篮的方位控制。

Flywheel is an important executive component of satellite attitude control system.

飞轮是卫星姿态控制系统的关键执行元件。

The Flywheel...gives a smooth ride that maintain momentum if you stop pedaling...

惯性轮在停止踩踏时仍维持了动能,提供了骑乘的平顺度。

Products wanted: Auto parts: harmonic balancer, flywheel and power brake booster.

需要货品:汽车配件,包括平衡器、飞轮/整速轮及动力刹车提高器。

The flywheel mounts to the engine's crankshaft and transmits engine torque to the clutch assembly .

飞轮安装在发动机曲轴上,它将发动机的扭矩传递给离合器总成。

Last Friday, flywheel, who sponsors the sea convoy, "We speak of acid Mengniu milk is fresh milk manufacturers.

上周五,飞轮海曾为赞助商护航,“我们代言的蒙牛酸酸乳都是新鲜牛乳制造”。

The power-saving accumulator is a mechanical power-saving unit with a flywheel, steel balls, a impeller and a pulley.

节能蓄能器是一种机械节能装置,由飞轮、钢球、叶轮和蓄能器胶带轮组成。

To test for a loose flywheel, turn off the key and just before the engine stops, turn the key on again.

要测试松动的飞轮,转动关闭点火开关并在发动机停止之前,再次接通点火开关。

As the flywheel speeds up and slows down, so does the frequency with which the magnetised spot passes the sensor.

当飞轮转速增大或者降低时,同样的磁标记点经过传感器的频率也随之变化。

Hebner, R., and Beno J., 2002, “Flywheel Batteries Come Around Again,” IEEE Spectrum, 2002 April, pp. 46-51.

郭博尧,民国92年4月,”全球石油危机对油价之冲击,”国家政策论坛季刊夏季号.

As early as 600 BC the Greek flywheel and coloring techniques made their pottery the envy of the Mediterranean.

早在公元前600年前,古希腊的转轮和上色技术让他们生产的灰陶成为地中海国家市场的宠儿。

According to filament winding process, a composite flywheel rotor laminated winding process was approved.

其次,结合复合材料缠绕成型工艺,进行了复合材料储能飞轮分层结构的工艺设计。

Flywheel tension has astable,constant strength mode to enhance cutting accuracy.

飞轮张紧采用稳定恒拉力方式,提高切削精度。

Novel permanent-magnet bias radial magnetic bearing used in magnetical suspended flywheel[J].

引用该论文 房建成,杨磊,孙津济,韩邦成.

Optimization design of sealed cowling structure for magnetic bearing reaction flywheel[J].

引用该论文 李红,叶全红,韩邦成,房建成.

The improvement of flywheel control system is spurred by high performance satellite attitude control system.

提高飞轮控制系统的性能对卫星姿态控制系统具有重要意义。

Comparison of effects of different young's moduli on stress and displacement of composite flywheel[J].

引用该论文 LI Cheng,WAN Zhi-chao,ZHENG Yan-ping,TIE Ying.

The FPC incorporates the flywheel energy storage technology and synchronous condenser.

该文建立了柔性功率调节器的数学模型,提出了相应的励磁控制策略。

An upper permanent magnetic bearing(PMB) was designed for a high-power,high-speed vertical energy storage flywheel.

为解决大功率立式高速储能飞轮下支承高负荷高损耗问题,采用在飞轮上端轴向永磁轴承卸载的技术方案。

The Flywheel Energy Storage(FES) technique hasbecome one focus of the international energy circles.

飞轮储能技术已成为国际能源界研究的热点之一。

Finally, based on the elastoplast theory, plastic design and analysis for metal hub of flywheel was performed.

最后,利用弹塑性理论,对飞轮转子的金属轮毂进行弹塑性设计与分析。

The crank reference pulse oringinates from a variable reluctant pickup which senses a projection on the engine's flywheel.

曲柄参考点脉冲信号由一个变磁阻传感器产生,它从发动机飞轮上的突起感受信号。

The reaction flywheel control system was designed by using PWM technology under the velocity control mode, and the hardware circuit was also set up.

设计了由PWM脉宽调制技术构建的工作在速率控制模式下的反作用飞轮控制系统,并对其硬件电路进行了具体实现。

If original clutch cover will be reinstalled, mark position of cover on flywheel for assembly referencUse paint or scribe for this purpose.

如果安装原来的离合器盖板,在飞轮上标记盖板的位置,以便于参考。用油漆或划线来完成此工作。

The crank reference pulse originates from a variable reluctant pickup which senses a projection on the engine's flywheel.

曲柄参考点脉冲信号由一个变磁阻传感器产生,它从发动机飞轮上的突起感受信号。

The inertia of the flywheel opposes and moderates fluctuations in the speed of the engine and stores the excess energy for intermittent use.

飞轮的惯量能使发动机转速稳定和储存断续使用时的多余能量。

The main products are as follows, exhaust manifold, bent axle, camshaft, rubbing sassafras nestification, gearbox, support, flywheel, etc.

主要产品有:排气歧管、曲轴、凸轮轴、摩擦嵌套、变速箱、支架、飞轮等。