fuze

Bursts on impact, or in the air (with fuze time).

在弹着点或空中爆炸(利用引信)。

To your love can light up without fuze.

对你的爱情,无须导火索,就能点燃.

Shanghai Fuze Environment Technology Co., Ltd.

上海复泽环境科技有限公司。

To your love can ligth up without fuze.

对你的爱情,无须导火索,就可以点燃。

He shows me how to change fuze.

他给我示范怎样换保险丝。

It is a new doable way for battery-less fuze which calle...

感应供电技术为无(储备)电源引信的供电提供了一种可行途径。

The signal processor is a core circuit of a frequencyhopping fuze.

信号处理器是跳频引信的一个核心电路。

Fuze quick is a point-detonating fuze, and is used with HE and WP projectiles.

快速引爆是一个点引爆引信,用于高爆弹和白磷弹,可有效杀伤站立或卧倒的人员,装甲和未加固车辆。

Flying aerodynamic heating makes great effect on the reliability of nose fuze.

飞行气动热对弹头引信可靠性影响极大。

A new algorithm of fault diagnosis and prognosis for radar fuze is presented.

提出了一种雷达引信故障诊断和预报的新算法。

Studies features of target identification and orientation of AC MMW fuze.

摘要对交流毫米波引信的目标识别与定位方法进行研究。

The principle of detecting metallic targets of MMW fuze is analyzed.

分析了毫米波引信探测金属目标的机理;

Working principle of pseudorandom code phase modulation CW fuze is introduced.

分析了此体制下引信的抗侦察性能。

ICM is a base-ejection projectile with a MT fuze and a number of submunitions.

改进型常规弹药是基地发射的一系列机械钟引信的子弹药。

Numerical simulation is an effective method to evaluate the laser fuze system.

考核激光引信系统性能的有效方法是回波信号的数字仿真。

A fuze delay allows penetration of dense woods and light earthworks.

用于炮弹穿透浓密的林木和轻型土木工事。

The time calculation method can make time setting of the fuze in penetrating warhead reasonable.

侵彻时间的计算可为合理地装定侵彻战斗部引信的延期时间提供定量的参考。

Time fuzes are the only fuze used for Base-Ejecting projectiles (e.g., Illumination, ICM, SADARM) and smoke.

只用于基地发射的弹种(比如,照明弹、改进型常规弹药、传感与破甲弹)和烟雾弹。

Because of the variations between fuzes, fuze time should never be used for High Angle fire with these projectiles.

由于各种引信引爆时间的变化,装配引信钟的炮弹绝不允许高射角发射。

HE is usually TNT or Composition B, and takes a PD (QUICK), VT, delay or Mechanical Time fuze.

高爆弹常填充TNT炸药或B型混合炸药,引信用快速、变时、延时或机械钟引信。

Fuze time has a mechanical or electronic timing device that functions a set time after being fired.

引信钟有一个机械或电子计时装置,用于设定炮弹在发射后的爆炸时间。

The design technique provides the new method that fuze can realize fleetness and real time to deal with information.

为解决在现代战争环境中引信为了满足高可靠性、用途、功能、恶劣环境、电磁干扰的要求,而使得信息处理和信息控制电路越来越复杂,同时又要求引信电路能够实现快速、时处理信息的问题提供了新的途径。

This paper analyzes the technology of frequency agility and FM fixed-distance in the field of radio fuze.

本文研究了无线电引信中的频率捷变调频定距技术。

Attributes to the function for the case of fuze tolerance grades have been taken as examples.

以引信公差等级指标为例构建了隶属函数。

There was the little coil of pale hair which had been used as the fuze to this great explosion.

里面有一小绺淡淡的毛发,它就是这场大爆炸的引信。

ESD damage and hardening of an electronic time fuze are studied by using experiments.

用实验方法研究了静电放电(ESD)对某电子时间引信电子线路的损伤及其防护加固措施。

ESD damage and hardening of an electronic time fuze unit are studied by experiment.

利用静电放电模拟器对某电子时间引信的电子部件的损伤及其防护加固进行了实验研究。

A fuze delay functions 0.05 seconds after impact. A fuze delay allows penetration of dense woods and light earthworks.

延时引信在炮弹着地后0.05秒引爆。用于炮弹穿透浓密的林木和轻型土木工事。

Know your round types, fuze types, gun/battery types, sheaf options, and fire options, and take advantage of them.

了解你方的炮弹种类,引信种类,火炮/炮兵连的种类,炮火射面和炮击方案,并好好利用之。

The result shows that the method meets the low-power-consumption designing requirements of the fuze circuit.

结果证明该文方法满足引信电路的功耗设计要求。

MEMS will provide a technology support that other technologies could not do for development of fuze.

微机电系统 (MEMS)将对引信的发展提供其它技术不可比拟的技术支撑。

The feasibility of its application in small caliber archibald fuze was analyzed.

该文还对该电源在小口径高炮引信中的应用进行了可行性分析 .

Fuze quick is effective against standing and prone personnel, armored and soft-skinned vehicles.

可用于调整炮火和打击山脊上的目标。

The developmental trend of electronic fuze and its antijamming measure are discussed.

提出了电子引信的发展方向及其抗干扰措施。

In this paper, A test method for the delayed arming circuit of the electric ignition fuze is introduced.

论文介绍了一种航空电触发引信延解电路的检测法,用于对长期贮存后的引信进行无损检测。

The integrated protection method can avoid false action of the radio fuze in UWS-HPM radiation field.

采用综合防护加固方法可使引信在超宽谱高功率微波辐照下不再产生误动作,达到了防护加固的目的。

Experiment shows that the error classification is correct.The conclusion can offer reference for fuze design.

通过试验,验证了误差分类的正确性,所得结论能为引信设计提供参考。

Recognizing slow target on ground is one of difficult research topic in radio proximity fuze signal processing field.

识别地面低速目标是无线电近炸引信信号处理研究的难点之一。

Aimed at the problem existing in original testing equipment of pressure fuze of land mine,an improvement has been made.

针对原地雷引信压发测试台存在的问题,提出改进方法和措施;

Lightning electromagnetic pulse field (LEMP) was simulated to study its effect on naked radio fuze.

摘要为了研究强雷电电磁场(LEMP)对没有保护状态下无线电引信性能的影响,对LEMP进行了模拟。

One embodiment of mine fuze intelligence is attack judgment and anti-minesweeping.

对目标进行选择攻击和抗扫是水雷引信智能化的重要体现之一。

The analysis results obtained have shown that the performance of the intelligent air burst fuze system is very good.

分析计算结果表明智能空炸引信提高了引爆概率。

This paper provides reference to the design for fuze explosion interruption safety.

该文研究可为引信隔爆安全性设计提供参考。

Validity of the model of fuze target and clutter were proved by simulation results.

仿真结果证明了目标和杂波建模的正确性和可靠性。

Abstract: Lightning electromagnetic pulse field (LEMP) was simulated to study its effect on naked radio fuze.

摘 要: 为了研究强雷电电磁场(LEMP)对没有保护状态下无线电引信性能的影响,对LEMP进行了模拟。

Result shows that the new combined fuze has excellent performance, especially excellent anti-jamming capacity.

结果证明这种复合引信具有优越的性能,尤其是具有极强的抗干扰能力。

The contact airburst fuze is a kind of fuze realizing accurate explosion height with wire length.

触发空爆引信是一种以导线长度实现炸高精确控制的引信,它具有精度高、抗干扰能力强、成本低的优点。

The computer also provides data to electronically set the shell's time fuze as it is fired so that it detonates after travelling the correct distance.

弹道计算机同样在弹药发射时以电子方式提供数据设置弹药的引信时间以保证它在飞行正确的距离之后引爆。

Finally, the test data of a certain radio fuze is processed and the results obtained have proved the feasibility of this method.

最后对某无线电引信的试验数据进行了处理,证明了方法的可行性。

The problem of fuze detonating height measurement is solved in theory and the executable method of the measurement is provided.

从理论上解决了在假设条件下引信炸高测量问题,并给出了高度测量的具体运算方法。