igniter

The igniter combustion often produces hot condensed particles.

这种点剂燃烧常常产生热的凝结颗粒。

The results show that the igniter mixture was nearly spheric.

结果表明:采用该工艺制备的药剂颗粒近似球形,流散性好;

Each air bag module contains an inflator, an igniter, and the folded air bag.

每一个安全气囊包括:一个气体发生器、一个点火器和一个被折叠的安全气囊。

This paper presents a novel hot-striking igniter for automotive headl amps.

介绍了一种用于汽车头灯的新型热启动电路基本原理和设计方法。

The orange coloured box is part of the electrical igniter system for the motor.

橘黄色的颜色方块的一部分,电气点火系统的汽车。

Ch?gyam Trungpa Rinpoche was a pioneer and igniter of Buddhadharma in the West.

邱阳创巴仁波切是将佛法传至西方的先驱者和燃火者。

The invention of safety igniter is a new &great breach in the fireworks displaying industry!

安引专用点火头发明是焰火燃放技术的一项新的突破。

The actuation is started by an electric signal that triggers the igniter and generates the pressure pyrotechnically.

此驱动由一个电讯号开始,电讯号出色地引发点火器并产生压强。

Main products are:Electoric Igniter for Fireworks display, Electoric ignitors,Fibreglass Mortar Tubes,Indoor &Stage Fireworks etc.series products.

主要产品有:烟花烯放用电子点火器、电子点火头、玻璃钢发射炮筒、冷光舞台烟花等。

The solvent-nonsolvent method was chosen to prepare the igniter mixture based on the current technologies of preparing the igniter mixture.

摘要通过对目前点火药制备工艺的分析,选择了溶剂-非溶剂法制备混合点火药。

Main products are:Electoric Igniter for Fireworks display, Electoric ignitors,Fibreglass Mortar Tubes,Indoor&Stage Fireworks etc.series products.

主要产品有:烟花烯放用电子点火器、电子点火头、玻璃钢发射炮筒、冷光舞台烟花等。

The solvent nonsolvent method was chosen to prepare the igniter mixture based on the current technologies of preparing the igniter mixture.

通过对目前点火药制备工艺的分析,选择了溶剂非溶剂法制备混合点火药。

The structure characteristic of top combustion and double-preheating igniter ,and its operation effect were presented in this paper.

介绍了顶燃双预热高炉煤气点火炉的结构特点及生产情况。

Design and Development of the Company's Gas Igniter Pulse won a number of national patent certificate, and UL and CSA certification.

本公司设计开发的燃气脉冲点火器荣获多项国家专利证书,并通过UL及CSA认证。

The amount of igniter charge must be strictly controlled so that the satisfactory internal ballistic performances can be obtained.

必须严格控制点火药量,特别是引燃药剂的量,才能获得较为满意的内弹道性能。

This paper introduces the structural design,composition selection for G01 electric igniter and the effect of charge process on ballistic performance.

介绍了G01电点火具的结构设计、始发药、中间药和输出药的选择以及装药工艺对弹道性能的影响。

Ch?gyam Trungpa Rinpoche was a pioneer and igniter of Buddhadharma in the West.Without a doubt, that must have been a challenging task.

伟大的吉美林巴曾说,瑜珈士在求道的过程中,他可能以各种方法,数年又数年地累积福德,但若能以一杯茶的时间来禅修,更能深入我们这个坚固的缠裹。

Different accessories, igniter and configurations are required for different test standard.Please specify standard(s) required.

不同测试标准要求不同附件、点火器及构型,请注明所需规格。

The paper has a detailed technical analysis on the multi parameter igniter, multi parameter complex sensors, signal transmitter, the digital signal hard...

对监测装置的多参数引发器、多参数复合型传感器、信号变送器以及数字信号的硬件处理与计算方法等关键技术环节作了详尽的技术路线分析。

A mechanical press type of electric igniter introduced in this paper, with originality in the structure design, is a kind of electromechanical initiation equipment.

该文介绍的机械压力式电起爆器在结构设计上具有独到之处,是一种机电一体化起爆装置。

Combining one-dimensional two-phase flow model of igniter and this random breaking model, the random process and some statistic distribution in igniter are solved.

结合点火管内火药燃烧过程的一维两相流模型,用蒙特卡罗方法对破孔过程进行了随机模拟,得到了点火管随机破孔时的一些统计分布规律。

Some other advantages of a moulded casing are built-in handles, adjustable chassis brackets, a convenient glow igniter holder, wrench holder and a non-conductive surface.

其他一些优势,塑造了一个套管是内建在手柄,可调式底盘托架,方便的辉光引爆器的持有人,持有人的扳手和一个非导电表面。

Write the selected music and ignition control programs into the igniter.

将选定的曲目的音乐及点火控制程序写入点火器中。

This system consists of a start switch, starter, start relay, ignition exciter, igniter plug, and control circuit.

这系统包括一个起动开关、起动器、起动继电器、点火励磁器、点火器插头及控制电路。

Two ignition methods of kerosene/oxygen igniter, direct ignition and indirect ignition, were discussed.

提出了两种应用气动谐振的气氧煤油点火器方案:直接点火方案和间接点火方案。

The jet flows from vent holes in a center-core igniter strongly influence the process of ignition in guns.

中心点火管传火孔射流场直接影响火炮膛内的点火传火过程。

When electrical current flows through the igniter, it produces heat, which ignites the generant material within the inflator.

当电流通过点火器时,产生的热量会点燃气体发生器中的某种物质。

Production and operation of the Company's gas pulse igniter, piezo ignition, ignition needle, relief valve, adjusting the valves and other products.

本公司生产经营燃气脉冲点火器、压电点火器、点火针、减压阀、调整阀等产品。

The results indicate that deliberate ignition is an effective way to remove hydrogen, depending on igniter location and first ignition time.

分析结果表明,点火器在空间的合理布置和初次点火时间的控制,可有效移除事故前期的氢气。

Taking aft-end igniter design for a rocket motor for example,design methods for ignition sequence,amorce quantity estimation and nozzle closure were described respectively.

以某型号发动机尾部点火设计为研究对象,对点火序列设计、点火药量的估算、喷管堵片的设计方法进行了阐述。

The igniter plug is installed on the forward side of the combustion chamber, it is used to provide the high energy spark for igniting the fuel/air mixture.

点火插头被安装在燃烧室的前面,被用来提供点燃油气混合物的高能花火。

Igniter system is one of the key components in pulsed plasma thruster (PPT).It ignites the main discharge of the capacitor and influences the performance of PPT.

摘要点火回路引燃脉冲等离子体推力器的主电容放电,是推力器的关键部分之一,其性能直接影响到推力器运行的成败。

Igniter is the most important part of MEMS solid propellant micro-thruster, and its igniting voltage and igniting reliability are mainly decided by the igniting resistance.

点火电路是MEMS固体化学微推进器中最重要的组成部分,其点火电压的大小及点火可靠性则主要取决于点火电阻.

L engine igniter INOP.

左发右点火器不工作。

In addition, QiaoBao also manufactures apiece kinds of brushless DC micro motor and igniter with combining two functions and divider cylinder for electronic ignition system.

另外、侨宝厂也制造各种无刷直流微电机、各种汽车分电器及单缸柴油机改进型天然发动机的分电器。

The available ignition circuit for large power xenon short arc lamp is improved to match direct low voltage supply and the new igniter can be used with DC power on board.

为了使大功率短弧氙灯能在低压直流供电的情况下顺利点燃,对现有触发电路进行了改进设计,使其适用于低压直流电源。

The double isotope release unit applying piston-like igniter and efficient control electric circuit can release "the tiny ball" and isotope at one pass trip, and enhances testing efficiency.

应用活塞式点火头装置以及有效的控制电路设计的双同位素释放器,一次下井就可以完成“冷球”和同位素的释放,提高了测试效率。

This paper briefs the work principles of IC4213 integrated circuit and some problems to be noted in its application in electronics igniter specially designed for CG-125 motorcycles.

本文简要叙述了4213集成块的工作原理和在CG-125摩托车电子点火器上应用时应注意的问题。

To the especially structure and material welding performance of a spaceflight igniter,the key welding problem is the spatter and strike fire phenomenon which is brought by high contact resistance.

针对特殊结构和材料的焊接性能,指出目前的焊接问题主要是存在飞溅和接触电阻过大而带来的“打火”现象;

This article mainly introduced the igniter plug iron casing crowds the pitch diameter working procedure swaging to design the entire process, it has produced the concrete design method and the step.

本文主要介绍了火花塞铁壳挤中径工序的冷挤压模具设计全过程,给出了具体的设计方法与步骤。

Considering the characteristic of thermite and the concrete structure of the welding rod, the design scheme of special-purpose flame igniter is adopted, and the igniter is designed in detail.

针对焊接药剂的特点,并结合焊条的具体结构,采用专用火焰点火器点燃焊条的设计方案,并对点火器进行了详细设计。

The purpose of the bulkhead is threefold: to seal the forward end of the motor, to retain the pyrogen igniter, and to act as a blowout plug in case of motor overpressurization (discussed earlier).

的目的,该舱壁是三个方面:密封着年底汽车,保留热原点火器,并充当井喷堵塞在案件电机overpressurization (讨论以较早者为准) 。

The results indicate that the LOVA gun propellants are difficult to be ignited, however, its ignition behavior can be improved by adding AP into the igniter.

结果表明,LOVA发射药难点火,但在点火药中添加高氯酸铵后可有效改善LOVA发射药的点火性能。

To the especially structure and material welding performance of a spaceflight igniter, the key welding problem is the spatter and strike fire phenomenon which is brought by high contact resistance.

摘要针对特殊结构和材料的焊接性能,指出目前的焊接问题主要是存在飞溅和接触电阻过大而带来的“打火”现象。

Detonation wave igniter was attempted to use on multi-cell aerospike nozzle and two short-duration hot-firing tests on the aerospike engine without generation cooling were executed successfully.

使用爆震波点火器点燃多个单元推力室,成功进行了热试实验。

Its chief product, motorcycle fitting series, includes: electronic igniter, high voltage ignition coil, starter relay, rectifier voltage regulator, flasher ,vehicle decorative lighting, and so on.

其主流产品摩托车配件系列有:电子点火器、高压包、启动继电器、调压整流器、闪光器、车用灯饰等。

Compared with high-frequency resonance ignition,the auxiliary pulse igniter needs more components which add to the complexity,it also includes some element such as Sidac,Thyristor,Diac and so on which decrease the reliability of the igniter.

相对于高频谐振点火方式,这种适用于低频方波的附加脉冲式点火电路需要比较多的元件数,既增加了复杂性,也因引入了火花隙、晶闸管等一些开关器件,使整个电路的可靠性大大降低。

By means of analysis on ignition fail reason of auxiliary combustion chamber for catalytic cracking unit,the unreasonable place existed in igniter was found,and improvement plan was given.

通过对催化裂化装置辅助燃烧室点火失败原因的分析,发现点火器设计上存在不合理之处,并提出了改进方案。

The result also indicates that ignit ion temperature of coal blend is mainly decided by the properties of easily igni ted coal when coals blended with great different ignition properties.

计算结果进一步证明,由两种着火特性差别较大煤种组成的混煤,其着火温度主要取决于易着火煤的着火特性。

This paper introduced the exploding bridgewire (EBW) safety multipoint igniter, including its design parameters, its structure, its performances and the multipoint ignition testing system.

介绍了爆炸桥丝安全多点点火器的参数设计、结构特点和性能以及多点点火测试系统。