isothermal
The reason for using the term isothermal nor...
对等温正火的名称也进行了讨论。
The hydrating heating was tested by the isothermal calorimeter.
采用扫描电镜研究了矿物的晶体形貌;
A process taking place at constant temperature is said to be isothermal.
温度恒定时发生的过程叫做等温过程。
Of or relating to an isotherm.
等温线的属于或关于一条等温线或恒温线的
The isothermal quenching process of the ductile iron camshaft was analyzed.
摘要对球铁凸轮轴的等温淬火工艺进行了分析。
The adsorption of alkaline-black followed Langmuir isotherm.
脱色率；
It can replace traditional isothermal anneal as advance heat treatment of roughcast of bearing rings.
可部分替代传统的等温退火作为轴承套圈毛坯的预先热处理。
Dye adsorption can be described by a multilayer adsorption isotherm curve.
染料吸附可以用多层吸附等温线来描述。
Within less than 1 millisecond the steep-fronted shock wave has traveled some distance ahead of the isothermal region.
在不到1毫秒的时间内,陡直的冲击波波阵面已比等温区领先一段距离了。
The adsorption behavior of APAR for Zn~(2+) obeys the Freundlich isotherm.
等温吸附服从Freundlich吸附等温式;
The adsorption behaviour of dodecylamine obeyed Flory-Huggins isotherm model.
吸附模型的拟合结果证明十二胺在铜镍合金表面的吸附符合Flory-Huggins等温线模型.
Langmuir equation could describe the sorption isotherm of Cu2+, Zn2+ and Cd2+ .
Langmuir方程可对Cu2+、Zn2+和Cd2+的等温吸附过程进行很好的描述。
The reduction of CuO/ZnO/Al_2O_3 catalyst was studied by the use of isothermal dynamic method together with TPR.
用等温迎头色谱法,结合程序升温还原图谱,对CuO/ZnO/Al_2O_3催化剂的还原性能进行了研究。
Controlling microstructure of Ti-47 Al-5 (C r+V+Mo +Nb ) ally by means of isothermal forging has been studied.
通过等温锻造方法对Ti－47Al－5（C＋V＋Mo＋Nb）（at%）合金进行组织控制。
The thermal decomposition of the modified AN and ANFO explosives have been studied by isothermal and DSC method.
采用恒温热分解和示差扫描量热法 ,研究了改性硝酸铵及铵油炸药的热分解行为。
The isothermal crystallization behaviors of polyazomethine(PAM)/nylon 6 composites were investigated by DSC.
采用差示扫描量热法 (DSC)对聚甲亚胺 (PAM) /尼龙 6复合材料等温结晶过程进行了研究。
Isothermal forging of semi-finished products are close to finished size, very small margin.
经等温锻造的半成品已经接近成品尺寸，余量很小。
After using classical isothermal method, the shelf life of the spectinomycin effervescent tablets was 2. 48 years.
结论：抗生素微生物检定法测定主药含量精密度好，准确度高。
Isothermal Block. The thermally conductive block that equalizes the temperature of all thermocouple connections.
等温块使所有热电偶连接的温度相同的热传导块。
The kinetics of thermal decomposition of Ag 2HgI 4 is studied by both isothermal and nonisothermal TG methods.
分别用等温热重法和程序升温热重法研究了碘汞酸银热分解动力学，得到了反应级数、速率常数和活化能。
A new forge residual heat isothermal normalizing technique for alloy carburizing steel is put forward.
针对合金渗碳钢锻(轧)件,研发了一种新的利用锻造余热等温正火热处理工艺。
The natural convection of the two-dimensional square cavity with horizontal isothermal baffles is studied.
计算研究了有水平等温阻流件的二维封闭方腔中空气的自然对流换热。
The non-isothermal and isothermal crystallization kinetics of PA1212 were studied by DSC.
采用DSC方法研究了PA1212的非等温和等温结晶动力学。
We say that a gas is isothermal if its temperature is the same throughout the volume it occupies.
若气体在它所据有的全部体积内温度都相同,我们就称这气体是等温的。
Method:The tests was carried out by classic isothermal method and the content of danshensu was determined by HPLC.
方法:采用HPLC法测定丹参素含量,经典恒温加速试验法考察丹参素在对照品溶液与丹参注射液中的含量变化。
The stress-strain date and curve were obtained from the isothermal compression experiment of 7A04 Al alloy.
根据等温压缩实验得出7A04铝合金应力-应变数据,拟合出材料温成形应力-应变曲线。
Reference Channel. On a thermocouple scanner card, the channel that measures the temperature of the isothermal block.
参考通道在热电偶扫描卡上，测量等温块温度的通道。
Anisotropy of isothermal remanent magnetism is a recently developed technique for rock fabric study.
摘要等温剩磁各向异性是一种新的磁组构研究方法。
The mechanical properties of nodular cast iron can be further improved by isothermal quenching.
等温淬火处理可进一步提高球墨铸铁的机械性能。
The DSC method is used to research isothermal crystallization kinetics of synthesized copolyester.
用DSC法研究合成共聚物的等温结晶动力学。
Objective To investigate the influence of several factors on isothermal automated DNA sequencing.
目的探讨恒温DNA自动测序中几种因素对测序结果的影响。
The principle and equipment of sorbitizing isothermal heat treatment without lead are introduced.
指出钢丝铅浴索氏体化热处理存在的问题,介绍无铅索氏体化等温热处理的原理和设备。
The different isothermal heat treatment techniques for AZ31 magnesium alloy tube were studied.
对AZ31镁合金管材试样进行不同工艺参数的等温热处理。
Among those forging methods, isothermal forging obviously exceeds others for its high quality and low cost.
在各种锻造方法中,等温锻造技术的高质量、低成本优势明显地优于其他方法。
Relief piping pressure drop shall be determined using isothermal compressible gas flow equations.
安全泄压管道的压降（阻力降）通过等温压缩气流的公式来确定。
The isothermal heat transformation diagram(IHT)is an important basis to makea heat treatment process of steels.
IHT图是制定钢的热处理工艺的重要依据。
The experimental data could fit the Langmuir isotherm formula perfectly.
氟离子在粉煤灰表面形成了氢键吸附和取代吸附。
Isothermal precipitation behavior of the calcium cerite phase in RE-bearing blast slag was studied by quenching method.
应用“淬火法”研究了等温过程含稀土高炉渣中铈钙硅石相的结晶行为,并讨论了该相析出和长大的动力学规律。
An alternative plan about the non isothermal inner temperature curing was provided.
根据外温变温试验结果还提出内温变温加热设想。
The mechanical behavior of 7A04 alloy in the semisolid state has been studied through isothermal compression tests.
通过半固态等温压缩实验,研究了7A04合金在半固态压缩过程中的力学行为。
Isothermal aging in the bainite phase, the microalloy elements have two effects:1.
在合金钢之变韧铁变态研究中发现，合金碳化物会扮演著下列两种角色：1.在高温沃斯田铁区域内所产生之合金碳化物有助于碳原子之分配排放，因此可以促进变韧铁相变态之进一步分解，并减少块状沃斯田铁之存在。
Isothermal normalization can improve or eliminate the banded structure and duplex grain structure in forging blanks.
结果表明,零件毛坯等温正火可以获得比普通正火更细的晶粒、更均匀的金相组织、更小的硬度散差。
Compressed gas is isothermal, that is, the process of compressed gases very small temperature changes.
压缩气体基本上是等温的，即压缩气体过程温度变化很小。
The coking and deactivation of virgin naphtha aromatization catalyst are studied on isothermal reactor.
利用等温固定床反应器研究了直馏汽油芳构化改质催化剂的结焦失活规律。
We further study on the isothermal gravimetric analysis of this polymer at three different temperature.
本文进一步对其在三个温度下的等温曲线进行了研究。
A simple computational model for isothermal phase change problem was based on the enthalpy formulation.
基于焓法模型导出了一种求解等温相变问题的简单计算模型。
This paper presents a mathematical model of calculating gas isothermal compressibility factor.
提出了一种计算天然气等温压缩系数的数学模型。
C/C composites were fabricated by isothermal chemical vapor infiltration (ICVI) using carbon cloth laminate as preform.
摘要炭布叠层为预制体，采用等温CVI工艺制备出炭/炭(C/C)复合材料。
The relational expression of natu ral convective heat transfer of isothermal vertical strip was found.
以条宽为特征量,得出了竖窄条自然对流换热关系式。
The present study represents an extension of earlier work by Penner on evaporation rates for isothermal droplets.
透过光阳公司提供的资料作为设定条件，评估引擎操作温度与分布均匀性。