lath

The henpecked Mr Wilson was as thin as a lath.

怕老婆的威尔逊先生骨瘦如柴。

WUXI FANGTAI EXPANDED METAL LATH CO., LTD.

无锡市方泰钢板网有限公司。

The little boy was as thin as a lath.

小男孩骨瘦如柴。

The little boy was as thin as a lath .

小男孩瘦得就像根板条。

Lath lath fitness while, food must catch up with.

瘦人健身的同时,饮食一定要跟上。

Work made with or from lath.

由板条所造的东西

Martensite lath changes into fine tempered sorbite w.

材料经高温回火得到细小回火索氏体,力学性能优良。

Fat person relatively lath lath can get used to harsh environment more.

胖人较瘦人更能适应恶劣环境。

Lath Length: up to 2440 mm or customized according to customer requirements.

板条长度:最长2440mm或按客户要求订做。

Testing and setup service of Motors for Wheel Lath System (MD894057).

测试与组合地上及地下车床车轮系统马达(MD894057)。

To change the shape of(a structure,such as a wall) by applying lath and plaster or boarding.

改变形状用板条,灰泥或大木板来改变(建筑物,如墙)的形状。

To change the shape of(a structure, such as a wall)by applying lath and plaster or boarding.

改变形状用板条,灰泥或大木板来改变(建筑物,如墙)的形状

The color-sprayed lath ceiling became quickly the second main stream of Metal ceiling products.

彩色喷涂条型天花迅速成为第二代主流金属天花产品。

To change the shape of(a structure,such as a wall)by applying lath and plaster or boarding.

改变形状用板条,灰泥或大木板来改变(建筑物,如墙)的形状

Having a texture composed of lath - shaped plagioclase crystals in a matrix of pyroxene crystals.

有斜长石结晶结构的在嵌有化石水晶基质的晶体中,由条形纹条石组成的结构的

To change the shape of(a structure, such as a wall) by applying lath and plaster or boarding.

改变形状用板条,灰泥或大木板来改变(建筑物,如墙)的形状

These lath martensie first nucleates in parent austenite intergranular and twin boundary.

应变诱发马氏体首先在原奥氏体晶界和孪晶界形核。

Microstructure of heat-affect zone (HAZ) is mainly lath martensite, bainite and residual austenite.

热影响区(HAZ)组织主要为板条马氏体、贝氏体和少量残余奥氏体;

The lath like carbide free ferrite and retained austenite has been observed by transmission electron microscope.

所得到的贝氏体形貌为无碳化物贝氏体铁素体与残余奥氏体平行排列的板条状结构;

Fix the top lath of the curtain onto the roller with the screws and washers provided.

用提供的螺丝钉和垫片把卷帘顶部板条固定在卷轴上。

The result indicates that there was a great deal of lath martensite in the quenched structure.

显微组织中存在大量板条马氏体,组织亚结构中存在大量位错和孪晶。

To change the shape of (a structure, such as a wall) by applying lath and plaster or boarding.

改变形状:用板条,灰泥或大木板来改变(建筑物,如墙)的形状

If longer satisfied with the picture, they can design their own work, make a bed of a lath frames.

如果配不着满意的画框时,可自己动手设计,用板条做一个称心如意的画框。

The results show that the structure of steel consists of lath martenite and lower bainite.

在一个奥氏体晶粒内一般存在四个板条领域,裂纹尖端的塑性区内存在主位错带。

The results are as follows:the higher the austenitizing temperature,the more the amount of lath martensite is.

结果表明,奥氏体化温度越高,获得板条马氏体的量越多,奥氏体化温度超过某个临界值时,中高碳钢均可获得全部板条马氏体组织。

Steel specimens were thermally simulated to form needle ferrite,lath ferrite and widmanstatten structure.

采用热模拟方法,模拟不同形态的针状铁素体、板条状铁素体和魏氏组织的试样,测定试样的断裂参量。

Use transparent thin fabrics or lath blinds, furniture or off in the metal objects, add Flash material.

使用透明薄织物或板条百叶窗,在家具或衬托物上增添闪光的金属材料。

Lath lath deficiency of yin with irritability, often enrage little blood, photograph fire easily excited.

瘦人阴虚,常气少血,相火易于亢奋。

Lath lath should fitness of first selection appliance, be like dumbbell, barbell, pulling force implement, assorted fitness implement etc.

瘦人应首选器械健身,如哑铃、杠铃、拉力器、组合健身器等。

Experiments show that the dual phase structure suitable to wire drawing consists of fine ferrite islands dispersed in the matrix of lath martensite.

实验表明,适于拔丝的双相组织是在板条马氏体基体上分布着细小的铁素体岛。

When increasing the time of inducing-heat quenching, the steel shows that the quantity of lath martensite increases but decreases with twin martensite.

力学性能测试显示:本试验用超高碳钢强度与中碳结构钢相当;

Lath sections with more smooth face and less destructive object cut and easy application to production are this way's advantages.

此种断裂控制爆破法具有切割面平整、对切割体的破坏性小、便于在生产中推广应用的突出优点。

It includes the following packaging materials: tray, clishion wood, lath, block, cylinder, and load plate and activities such as wooden containers.

它包括下列包装材料:托盘、垫木、条板、填塞块、圆筒、木箱、负荷板和活动木质容器等。

The results shown that the plasticconstrain ahead of the crack tip is mainly determined by microstructure of lath martonsite.

结果表明:板条马氏体微观组织结构决定裂纹尖端塑性约束程度;

On the contrary, lath bainite decreases and granular bainite increases with stress increasing at isothermal bainitic transformation.

等温冷却时,恰好相反,即随压应力的增加,组织中板条贝氏体的数量逐渐减少,粒状贝氏体增多。

Can also use "Shalian" thin quality fabrics, or in accordance with its own style of decoration appropriate use lath blinds.

还可以使用“纱帘”等薄质织物,或是根据自家的装修风格适当选用板条百叶窗。

The phases of quenched 4Cr4Mo2SiV steel include mixed martensite (mainly lath martensite), non-solutioned carbides and residual austenite.

4Cr4Mo2SiV淬火后的组织是以板条马氏体为主的混合型马氏体+未溶碳化物+残余奥氏体。

The relationship between fracture toughness and notch toughness, tensile ductilities in lath martensite steel has been investigated.

研究了超高强度板条马氏体钢的平面应变断裂韧性与缺口韧性、拉伸塑性之间的关系。

"He was extremely tall and as thin as a lath, his face a sickly yellow, his weathered hands as big as palm-leaf fans.He put both hands on the table.

只见他身材极高极瘦,宛似一条竹篙,面皮蜡黄,满脸病容,一双破蒲扇般的大手,摆著放在桌上。

When austenitizing temperature is higher than a critical temperature,full lath martensite can be obtained in medium and high carbon steel.

钢的含碳量越高,获得全部板条马氏体的临界奥氏体温度越高。

This method is suggested because the weight of one full coating might be too much, and you would probably have some trouble keeping it in place on the lath.

建议这样做的原因是一个整层的重量会很大,可能不大容易在板条上使灰浆就位。

A conventional plaster application using metal lath mechanically fastened to the existing exterior and finished with a good acrylic cement finish is what is normally recommended.

通常建议的上灰泥的方法是,用金属板把灰泥固定在现有表面上,再以优质丙烯酸接合剂涂抹作为最后一道工序。

At present, it's widely used in the production of steel made furniture, stainless products, theft-proof door, kitchen fitting ad repair welding of wire lath.

目前广泛用于钢制家具,不锈钢制品,防盗门生产,厨房设备及钢丝网片补焊等。

Energy saving wall and material: heat preservation split block, lath, light-weight wallboard, exterior wall heat preservation technology and inner buikhead.

节能墙体及材料:保温切块、保温条板、轻质保温墙板、外墙外保温技术、内隔墙。

By the integration of numerical result and CNC programming,a new method which advances the effciency at the CNC machiningof arced lath tool is provided.

通过数值解和数控编程结合,为圆弧车刀在数控加工中提高加工效率提供了一种新的办法。

The results show that higher Nb content is favorable for obtaining acicular ferrite (AF).Accelerated cooling promotes AF transformation, and refines lath size of AF.

结果表明,铌含量高有利于在极低的冷却速率下获得针状铁素体组织,提高冷却速率则能进一步促进针状铁素体转变,并使铁素体板条得到细化。

The results show that higher Nb content is favorable for obtaining acicular ferrite(AF).Accelerated cooling promotes AF transformation,and refines lath size of AF.

结果表明,铌含量高有利于在极低的冷却速率下获得针状铁素体组织,提高冷却速率则能进一步促进针状铁素体转变,并使铁素体板条得到细化。

After proper heat treatment the steel will have a dual phase structure of austenite and bainite. arranged alternatively in the form of lath ferrite and thin film austenite.

经适当热处理,获得贝氏体铁素体板条与奥氏体薄膜交替排列的奥氏体-贝氏体双相组织。

At present,it's widely used in the production of steel made furniture,stainless products,theft-proof door,kitchen fitting ad repair welding of wire lath.

目前广泛用于钢制家具,不锈钢制品,防盗门生产,厨房设备及钢丝网片补焊等。

This paper sets up the plastic energy consumption and tensile functions of the ideal rigid plastic steel wire and lath under large curvature tension bending.

建立了理想刚塑性钢条、板条在大曲率拉弯过程中的塑性耗能量函数与拉力函数。