pinion

There is something wrong with this pinion; it doesn't move.

这个小齿轮有问题,不转了。

Vendor Shirley Pinion displays her wares in Dade County, Ga.

乔治亚州戴德县的卖主在展示她的货物。

Refer to Drive Pinion Bearing Pre-Load Adjustment.

参阅驱动小齿轮轴承预荷调整。

Worn teeth on ring gear or drive pinion gear.

环形齿轮或驱动小齿轮上齿磨损。

Rotate the pinion yoke three or four times.

旋转小齿轮轴轭三次或四次。

Remove pinion gears from differential case.

从差速箱处拆卸主动齿轮。

Install pinion front bearing, if necessary.

如需要,安装小齿轮前轴承。

Install the pinion mate gears and thrust washers.

安装小齿轮配合齿轮和止推垫圈

End play in drive pinion bearings.

驱动小齿轮轴承的端隙。

He is held with his arms pinion together behind his back.

他被捉住反剪著双臂。

Usually, we adopt pinion drive for large mills.

大型磨机我们通常采用边缘驱动。

Excessive pinion changes in ring spinning.

细纱机小齿轮(轻重)更换过频。

The pinion meshes with two other gear wheels.

这个小齿轮和另外两个齿轮相啮合。

Remove the universal joint strap bolts at the pinion shaft yoke.

在小齿轮轴轴轭处拆卸万向节扣夹螺栓。

Pinion by the press of men around them, they are unable to move.

周围的人群挤压著他们,使他们动弹不得。

Pinion by the press of men around them,they are unable to move.

周围的人群挤压著他们,使他们动弹不得。

Hold the yoke with Wrench 67Remove the pinion shaft nut and washer.

用扳手6719握住轴轭。拆下小齿轮轴螺帽和垫圈。

Check ring gear and pinion gear teeth contact pattern.

检查环形齿轮齿接触印痕。

Who is the most respectable economist in China in your pinion, why?

你认为在中国谁是最值得尊敬的经济学家,为什么?

Deity create ain's eden,on the inside gestate have pinion's angels.

神创造了自己的乐园,在里面孕育了带着翅膀的天使。

Rack and pinion telescoping section ensures proper load alignment.

.齿轮齿条套车部件,保证荷载同轴。

The pinion shaft runs in porous bronze bearing bushes.

小齿轮轴运行多孔青铜轴承衬套。

Frequent changes of pinion in drawing and ring spinning.

并条与细纱工序(轻重)小齿轮更换频繁。

Excessive distance between pinion gear and flywheel/drive plate gear.

小齿轮和飞轮/驱动板齿轮之间距离过大。

Push and hold ring gear upward while not allowing the pinion gear to rotate.

当不准许主动齿轮旋转时,向上推环齿轮,并放牢它。

Twin guide bars on pistons assure optimum rack and pinion engagement.

在活塞上配置双导杆,确保优化齿条和齿轮啮合。

New “X” servo motor, new spindle bearings, new pinion &gear drive in 2007.

2007年配新“X”伺服电机,新主轴轴承,新小齿轮和齿轮驱动。

Inside each gearbox, a pinion gear spins a ring gear attached to ball diff.

变速箱内的每一个齿轮旋转的齿轮一齿圈重视球差异。

New “X” servo motor, new spindle bearings, new pinion & gear drive in 2007.

2007年配新“X”伺服电机,新主轴轴承,新小齿轮和齿轮驱动。

Steering was by bevel gears jointed to a semi-circular rack and pinion.

转向操作通过与半圆齿条和小齿轮连接的伞齿轮实现。

The LR Series rotary actuator is a low profile rack and pinion design.

LR系列 旋转驱动器是一种低剖面齿轮齿条式设计。Two independent pistons drive their corresponding racks against the pinion thereby rotating the platform.两个独立的活塞驱动对旋转的平台,从而相应的齿轮架。

Align mark on front universal joint, or CV joint, to the mark on the axle pinion yoke, or flange.

将前万向节或CV万向节上的标志与车轴小齿轮轴轭或凸缘上的标志对准。

Mark the propeller shaft and pinion yoke, or pinion flange, for installation reference.

在传动轴和传动轴轴轭、或小齿轮轴轭上作标记,作安装的参考标志。

The large machined main gear and standard15 tooth pinion gear comprise the rotor head drive system on the Synergy N9.

大型机械齿轮、准主要包括1915年牙杯头插齿传动系统的协同N9号.

A small pinion having cylindrical bars instead of teeth,used chiefly in inexpensive clocks.

带有圆柱形的棍代替齿轮的小齿轮通常用于便宜的钟表。

A toothed bar that meshes with a gearwheel,a pinion,or another toothed machine part.

齿条与齿轮、锥齿轮或其它带齿的机器部件咬合的带齿的棒条

Remove the depth shims from rear pinion bearing cup bore in axle housinRecord the thickness of the depth shims.

从轴管里的后小齿轮轴承盖孔拆卸限深垫片。记录限深垫片厚度。

Install the pinion mate shaft lock screw finger tight to hold shaft during differential installation.

在差速器安装期间,安装小齿轮配合轴锁螺丝,用手紧固它,以把握住轴。

Rotate the pinion gear several complete revolutions to align the bearing rollers.

转动主动齿轮若干圈以校正轴承滚柱。

The four main types of gears (spur, helical, worm, and bevel)and a rack and pinion are shown in Figure 7.

图7所示是四种主要的齿轮(巨齿轮,斜齿轮,蜗轮和伞齿轮)以及齿条和小齿轮。

A toothed bar that meshes with a gearwheel, a pinion, or another toothed machine part.

齿条与齿轮、锥齿轮或其它带齿的机器部件咬合的带齿的棒条

Unique twin guide bar feature absorbs rack and pinion load and ensures optimum teeth engagement.

独特的双导杆具有吸收齿条和齿轮负载的特点,确保齿轮之间能够优化啮合。

The pinion gear is on the same shaft as the motor armature and rotates at the same speed.

小齿轮如马达电枢般在同一曲轴上,且以相同的速度转动。?

The device can be powered electrical, pneumatic, manual, pinion rotating devices.

本产品驱动装置可采用电动、气动、手动、伞齿轮转动等装置。

The wings of the ostrich flap joyously: Are they the pinion and plumage of lovingkindness?

13鸵鸟的翅膀欢然扇展,岂是显慈爱的翎毛和羽毛么?

The large machined main gear and standard 15 tooth pinion gear comprise the rotor head drive system on the Synergy N9.

大型机械齿轮、标准主要包括1915年牙杯头插齿传动系统的协同N9号.

An over-running clutch on the drive pinion prevents the starter from being driven by the engine once it starts.

在驱动小齿轮上的一个超转离合器可避免启动马达被引擎带动,一旦引擎启动了。

When on music's mighty pinion souls of men to heaven rise,then doth vanish earth's dominion man is native to the skies.

在音乐强大的感染力以下,人们的灵魂向天堂升腾,大地消失,人们仿佛置身于天穹之下.

Check that the pinion gear does not return inward after the cable of terminal C is disconnected.

检查驱动齿轮是否能回位,把C接线柱电线断开。(不能回位就正常)

The pinion with self-aligning device is suitable especially for the case of heavy load and low speed drive.

重载低速的主要特征是末级小齿轮偏载严重,结果导致小齿轮的严重磨损甚至折断。