rotor

An aircraft powered by a conventional propeller and supported in flight by a freewheeling, horizontal rotor that provides lift.

旋翼机在飞行中以常规的螺旋桨来驱动并靠惯性滑行支持的,提供升力的水平旋转仪

The rotor cataracts water over the top of the machines.

回转轴将水从机器顶上注入。

It has locknut fasten rotor to a spindle.

配有防松螺母固定转子与中心轴。

Install the brake rotor shield to the knuckle.

向转向节上安装煞车分火头护罩。

Wider nozzle at draw frame or rotor.

并条或转杯喇叭口宽。

Numerical Simulation of Rotor Flow in Hover.

悬停下旋翼流的数值模拟。

Fiber length to rotor diameter not near to unity.

纤维长度与纺杯直径不一致(协调)。

Inspect distributor cap,rotor,and ignition wires.

用电脑翻译成:检查经销商盖帽、电动子,和燃烧导线。

All rotor halves that we want on one drawing!

所有半转轴我们想在一个图纸上。

It is best to allow the rotor to rotate freely.

最好让转子自由旋转。

Spark found between rotor and stator.

发现转子与定子之间有火花。

The rotor cataracts water over the top of the machine.

回转轮将水从机器顶部注入。

Replace rotor; adjust the clearance.

更换转子,调整间隙。

The shaft of the turbine is coupled to the rotor of the generator .

汽轮机的轴与发电机转子相连结。

The rotor has recesses in its three faces between the lobes.

转子在其凸角之间的三个面上有凹槽。

The shaft of the turbine is coupled to the rotor of the generator.

汽轮机的轴与发电机转子相连结。

Install caliper over rotor and into mounting bracket.

在转子上方安装夹制器至固定托架中。

Remove the distributor cap and mark the position of the rotor.

拆去分电器盖并标记转子位置。

Rotor Wake Modeling for Flight Dynamic Simulation of Helicopters.

直升机飞行动力学模拟的旋翼尾流建模。

Analysis and Testing of Mach-Scaled Rotor with Trailing-Edge Flaps.

带后缘襟翼马赫数尺度旋翼的分析与测试。

Be suitable for painting or glue dropping of motor rotor coil.

适用电机转子线圈滴漆或滴胶。

Be suitable for rotor winding of electromotor with odd number slot.

适用于奇数槽电机转子的绕线。

Correlation of Helicopter Rotor Tip Vortex Measurement.

直升机旋翼梢旋涡度量的相关。

The axis around which the major rotor of a helicopter turns.

直升飞机的主要转子围绕它旋转的轴。

A rotor from the engine makes the wheels of the car turn.

发动机的轮子使车轮转动。

Both stator and rotor are made of ferromagnetic materials.

定子和转子都是由铁磁材料制成。

The Synergy N9 tail rotor system is ready for hard 3D.

协同N9号尾桨打制三维准备.

By this way, we can get accurate rotor position at any speed.

详细讨论了同步电机的转子位置估算方法,并给出了实验结果。

Injection-minded rotor magmata are available for clients.

并可为用户提供注塑完整的转子磁体。

A rotor disc is mounted eccentrically in the pump housing.

转子盘偏心安装在泵壳内。

One solution is to add a rotor position sensor to the synchromotor.

解决这一问题普遍的做法是加装电机转子位置传感器。

Helical rotor is one of the key parts of high consistency repulper.

螺旋转子是高浓碎浆机的关键部件。

Since the rotor of a autogyro is always spinning, it cannot stall.

由于转子的旋翼始终是纺纱,它不能停滞。

Chet poses excitedly in front of a 26 metre wind rotor.

一峰站在长达26米的风车叶前,心情兴奋。

Thrust of the resulting hot jets thus drove rotation of the rotor.

主旨战斗机从而导致热点轮换驾驶的转子。

Magnetic rotor identification prevents the rotor from overspeeding.

该机广泛使用于生物、医学、制药、遗传学、食品卫生、防疫检验、环境科学、大专院校等领域。

The subharmonic resonance of the cracked rotor was analyzed.

分析了裂纹转子的亚谐波共振特性;

A new way to solve dynamical response of rotor blade in helicopter.

提出了一种全新的计算旋翼桨叶动力响应的方法。

Rub and impact in rotor system are studied experimentally.

对转子系统碰磨故障进行了实验研究。

A “paddle-wheel” type rotor keeps the screen plate clean.

一种桨轮状转子用来保持筛板的清洁。

The rotor wing produces lift during VTOL, using aerodynamics.

该旋翼产生的电梯在垂直起降,利用空气动力学。

A rotor is the twister and condenser of the rotor-spinning machine.

转杯是气流纺纱机的加捻、凝聚元件。

The diameters of the rotor and the stator are limited by mechanical stresses.

转子和定子的直径受到机械强度的限制。

The rotor connected the various ports in the stainless-steel valve block.

转动件和不锈钢阀块各个孔相连。

Rotor braking surfaces can be sanded or machined in a disc brake lathe.

在碟式煞车床上研磨或加工转子煞车表面。

Rotor spinning is a popular process and has replaced some ring- spinning units.

气流纺纱是一种常用的纺纱方法,并且已经取代了一些环锭纺纱设备。

Be suitable for rotor coil of engine to arrange and wind at the same time.

适用发电机转子线圈同时排绕线。

Be suitable for rotor winding of electromotor with even-number slots.

适用偶数槽电机转子的绕线。

The crankshaft makes three rotations for each rotation of the rotor.

转子每转一周,曲轴转3周。

Study on Modeling of Rotor Thermal Stress with Varying Coefficients.

汽轮机转子热应力自适应模型研究。