tig
Three welding modles:DC TIG,PulsedTIG,DC MMA.
集直流氩弧焊、脉冲氩弧焊、直流手工焊于一体。
The TIG welder used for much of the construction.
在氩弧焊焊接机建造多次使用。
Fig.6 The effect of heat input on the UTS of the TIG welded joints.
图6线能量与钨极氩弧焊焊接接头极限抗拉强度的关系。
This paper introduces the TIG welding technology for EGR cooler shell.
介绍了EGR冷却器外壳钨极氩弧焊焊接工艺。
Just wondering if the TIG Carbon blade uses the real carbon to make?
有个疑惑TIG碳桨系唔系用真碳制造?
Schandmaul machen Stimmung, wenn n?tig mit Gewalt. Weit mehr als bei d......
2004的相关专辑:总记录数:3总页数:1当前页:1首页上一页1下一页末页
Such as electric arc welding, carbon dioxide gas shielded arc welding, TIG etc.
如：电弧焊、二氧化碳气体保护焊、氩弧焊等各种焊接。
TC4 alloy can be welded by many kinds of methods such as TIG, MIG, PAW and electron beam welding (EBW in short).
TC4钛合金在保护良好的条件下可以采用TIG、MIG、PAW及电子束焊等多种焊接方法。
The multipurpose welders in the series can be operated for MMA, DC TIG welding, Plasma cutting processes.
焊机具有手工弧焊,直流氩弧焊,等离子切割多种功能。
TIG welding power source made from SCR and bifilar winding energy saving inductor is introduced in this paper.
研制了一种用双绕组储能电抗器构成的晶闸管TIG焊电源。
Welding tests showed the panel TIG welding machine can be applied successfully in hyperbaric conditions.
试验证明,该焊机可以成功地应用于高压环境下的焊接。
The fuzzy pattern recognition technique is then applied to classifying TIG weld quality.
模糊模式识别工艺被应用于TIG焊接法质量的等级分类。
Bead welding process to Q235A was made by TIG welding and H1Cr24Ni13 austenitic stainless steel welding wire.
采用TIG焊方法和H1Cr24Ni13奥氏体不锈钢焊丝,对Q235A进行堆焊加工。
Welding equipment includes automatic plasma arc and TIG hardfacing machines. Only a few typical machines are shown here.
焊接设备包括自动等离子弧和TIG表面硬化机械设备。在此只展示少数典型设备。
Properties of pearlitic steel and austenitic stainless steel compound pipes TIG welded joint are studied in this paper.
研究了珠光体钢和奥氏体不锈钢复合管钨极氩弧焊(TIG)接头的性能。
Thus, standard consumer utility theory is a special case of the TIG if the role of the equity agent is ignored.
因此，如果不考虑公平动因的作用，标准的消费者效用理论就是TIG理论的一个特例。
It researches the TIG Deposit surfacing welding rapid shaping vision sensor system.
对于TIG熔敷堆焊快速成形视觉传感系统进行了一定的研究;
The results show that the bead evidently presents “pin shape” when welded by laser TIG hybrid overlip welding.
结果表明,激光-TIG复合缝焊的焊缝为明显的“图钉型”形貌,上部分为TIG电弧焊接成形,下部分为典型的激光焊接成形。
A new type of age hardening alloy metal powder-cored wire for TIG surfacing is developed.
研制了一种用于TIG堆焊的时效硬化工具合金金属粉芯焊丝。
A special TIG flux for welding mould made of ZA alloy is experimentally developed.
利用试验方法,研制出了一种ZA合金模具TIG焊接专用焊剂。
Mathematical model and analysis of the protective effect of TIG welding is adopte for torch design.
焊接时保护气流流场的数值分析对于焊枪的设计提供了新的思路。
The general concept and consist of pulse TIG welding machine improved are introduced in this paper.
介绍一种用普通直流氩弧焊机改装脉冲焊的装置,论述了各组成部分的基本原理。
The threaded stainless steel vane are solidly TIG welded to the vanes, making this the strongest spider on the market.
有现状图案装饰的不锈钢管叶轮被TIG焊接到集线器上，使之成为市场上最强的三角架。
A new type of maraging steel metal powder-cored wire for die TIG surfacing is developed.
研制了一种用于TIG模具堆焊的马氏体时效钢金属粉芯焊丝。
China is a country with rich tungsten resource, tungsten electrodes have been widely applied in the TIG welding.
我国是钨资源大国,钨电极在亚弧焊接中已得到广泛应用。
A type of switched HF pulse TIG welding power source is introduced in this paper.
本文介绍一种开关式高频脉冲TIG焊电源。
Objective To investigate the therapeutic effect of tetanus immunoglobulin(TIG) on severe tetanus.
目的探讨人破伤风免疫球蛋白(TIG)在重症破伤风中的治疗作用。
The results of experiment on the pulse TIG welding process show that the fuzzy inference-neural network control sc...
将上述方法用于实际脉冲TIG焊过程控制，结果表明模糊神经网络控制方案有效。
Meanwhile the welded seam corrosion-resistance property of EBW of AA8009 alloy is better than that of TIG.
同时,AA8009合金电子束焊缝的抗蚀性要明显优于氩弧焊的抗蚀性。
The automatic TIG welding has been successfully used in the successive welding of stainl...
以实际生产表明了钨极自动氩弧焊连续焊接不锈钢复合管的成功应用。
The high-frequence oscillator used in TIG welding is a serious interference source to the nearby electronic circuits.
TIG焊中采用的高频振荡器，是邻近电子电路的严重干扰源。
The dynamic change of the molten pool influences the quality of welding joint directly in TIG.
TIG焊接过程中,熔池的动态变化直接影响焊接质量。
In this article, the author proposes a theory of intraperson games (TIG) to fill this important gap.
为填补这一空白，在这篇文章中，作者提出了一种内心博弈的理论（TIG）。
The paper researches the relation of parameters and weld width of TIG deposit surfacing used in rapid prototyping.
研究了用于快速成形的TIG熔敷堆焊工艺中各参数与焊缝宽度的关系。
Applying TIG hot wire process, It is applied to continuous joining production line of tubes in boiler industry.
采用TIG热丝焊接工艺，主要应用于锅炉行业直管加长焊接生产线。
The crack analysis and the prevention measure for TIG welding of AZ31B magnesium alloys were studied.
摘要分析了AZ31B镁合金TIG焊接头裂纹形成机理，并提出了相应的预防措施。
The priciple,structure,functions,effects,computing methods and data of new-developed AC arc welding machines used in MMA,TIG and SAW are dealt with.
本文综述了新近发展的手工电弧焊(MMA)、钨极惰性气体保护焊(TIG)和埋弧焊(SAW)中使用的交流弧焊电源。 其原理、结构、功能、效果、计算方法和数据。
Finally, an experimental verification of the classification results for TIG weld quality with different process parameters is shown.
最后将展示的是TIG焊接法质量的等级分类的不同工艺参数的加工实验检查结果。
From the result of experiment,the vision sensor system get the image that can reflect the weld track of TIG Deposit surfacing welding clearly.
从实验结果来看视觉传感系统所得到的图像能够清晰反映出TIG熔敷堆焊的焊接轨迹。
The copper twyere of blast furnace is composed of casting body and rolling butt end which are joined by TIG hand welding process.
高炉紫铜风口是由铸造本体和轧制端头两个部分采用TIG手工焊接而成。
The striking and stabilizing arc machine consisting of a RLC series resonant circuit of the AC TIG welding machine is introduced.
介绍了一种由RLC串联谐振电路构成的交流TIG焊机引弧稳弧器，试验表明可以解决小电流条件下的引弧和稳弧，效果良好。
The article mainly introduces the FRONIUS TIG process and ETR automatic cladding equipment which are applied in the production of valve.
重点介绍了Fronius热丝TIG焊工艺和ETR全自动堆焊设备在阀门堆焊制造上的应用。
The trawsform on the weld penetration depth are studied after welding the Austenitic steel of activated flux with TIG welding.
在采用TIG焊接方法时,在奥氏体不锈钢的表面涂敷一层活性化焊剂进行焊接,会影响焊缝熔深的变化。
This paper compares the advantages and disadvantages between TIG,MIG and PAW by analyzing the welding characteristics of aluminum and aluminum alloys.
通过铝及铝合金焊接特点的分析,比较TIG、MIG、PAW不同焊接方法的优缺点;
This paper illuminates the principle,installation,failure,reason and solution of WSM series SCR inverter pluse TIG welding machine.
介绍了WSM系列晶闸管逆变式直流脉冲TIG焊机的基本原理、安装、故障现象、原因以及排除方法。
The results show: impact effect of hardness at weld toe by ultrasonic peening is not great than treatment by TIG dressing.
TIG熔修处理工艺在焊趾区引入了残余拉应力,而超声冲击在焊趾区形成了较大数值的压缩应力。
Today, the next generation of this technology - AC TIG inverter - features three advanced squarewave technology capabilities.
今天,新一代的这种技术交流TIG焊变频三个特点矩形先进技术的能力.
It is very necessary to compare the ultrasonic peening method with the TIG dressing method, because the latter is used widely.
结果表明:超声冲击处理对焊趾区硬度的影响不如TIG熔修明显;
Very convenient to operate by TIG Argon welding /MMA welding, suitable for welding stainless steel, mild steel, steel alloy, copper, etc.
可用TIG焊和手工焊，操作方便，可用在不锈钢，合金钢，碳钢，铜及其他有色金属的焊接。
In this paper,the vision technology with adaptive control technology are used in TIG welding quality control of the aluminium alloy.
将视觉传感技术与自适应控制技术相结合用于铝合金TIG焊接过程质量控制。